FUNCTIONS ENABLED BY RADIO CONTROL:

The label Rabbit / Snail is a speed function, the rabbit allows you 100% output speed on all levers, while the snail allows 50%.

IMPORTANT: For correct configuration and operation of the radio proportional controller, please provide us with the data for the following three items from the following photograph below:

1. Length center between spindles, defined distance from the center of one spindle to the next spindle center - given in mm.

2. Stroke of the spindle from the zero (0) position in mm in one direction, defined distance for moving the spindle in one direction from the starting position (0), when we move the lever in one direction - given in mm,

3. Voltage 12/24V, defined source of power supply voltage - 12V or 24V.

EXTENSION OF THE STROKE OF EACH SEGMENT:

For a spindle stroke of up to 13 mm, extension of each segment is not required. The dimensions are as follows (example for a stroke of 13 mm in each direction):

For a spindle stroke over 13 mm, extension is required EXTENSION OF THE STROKE OF EACH SEGMENT (12-20mm) FOR VALVE. This applies to each segment individually. As many segments as there are, that many extensions are needed. If you have four spindles, then four extensions are required. The dimensions are as follows (example for a stroke of 20 mm in each direction):

No extension (stroke up to 13 mm)	With extension (stroke over 13 mm)

Video: